-
CCT Tank – 12,7 Hl
CCT Vtotal=12.7Hl Vwork=10Hl Dinternal=1150mm Dinsulation=1300mm Hmax=2570mm;
– working pressure 3bar;
– design pressure 3.3bar;
– test pressure 4.7bar;
– design vacuum 400mm WC
– Working temperature in the tank: up to 30˚C
– CIP cleaning in the tank: up to 30˚C
– Material 1.4307 (AISI 304L)
– Internal surface finish: 2B;
– External surface finish: 2J;
– Internal butt welding seams: flat grinded to Ra<0.8µm;
– Internal corner welding seams: strip grinded 2×20 to Ra<0.8µm;
– External butt welding seams: strip grinded 2×20 to Ra<1.6µm;
– External corner welding seams: strip grinded 2×20 to Ra<1.6µm;
– Tank surfaces: completely cleaned and degreased;TANK 1.27/1150/750
– torispherical lid D=1150mm DIN28011
– cylindrical part D=1150mm Hcyl=750mm
– conical bottom D=1150mm 60°
– 3pcs. adjustable brushed legs
TANK TOP SYSTEM:
– Safety valve art.6147 DN20 pressure range P=2.5-8bar;
-Vacuum valve art.6139 DN50;
-Spray ball LECHLER ”Mini Spinner” 360°,DN20 slip-on;
-CIP/CO2 valve DN50; – CIP connection DN50;
– Tank connection DN65/DN50;
*needed CIP at 3bar-15m3/h;
CIP/CO2 PIPE LINE DN40 ENDING WITH BUTTERFLY VALVE DN40 WITH CLAMP CONNECTION
(distance from floor to pipeline H=1000mm)
BUNGING VALVE DN 25 FOR PRESSURE P= 0.3 – 3bar ”KIESELMANN”
MANOMETER D100 G1/2”
GRIP FOR LADDER
COOLING LASER-WELDED DIMPLE JACKET ON TANK SHELL F=1.2m2 H=475mm, Pmax=5bar Tmax=50°C,
WITH INLET/OUTLET G1”
COOLING LASER-WELDED DIMPLE JACKET ON TANK BOTTOM F=0.9m2, Pmax=5bar Tmax=50°C WITH INLET/OUTLET G1”
OUTSIDE COLLECTOR PIPE DN32 FOR CONNECTION TANK BOTTOM AND TANK SIDE JACKETS
CONNECTION G 1/2” TEMPERATURE CONTROLLER TYPE “CLIP”
ELLIPTICAL MANHOLE 340х440 LAVEGGI Аrt. А18 / PED
MANUAL SAMPLE VALVE DN10 KIESELMANN
DOUBLE OUTLET (CLEAR AND TOTAL) DN32 EACH OF THEM ENDING WITH BUTTERFLY VALVE WITH CLAMP CONNECTION
(distance from floor to outlet H=250mm)
INSULATION 75mm PU foam CFC – free ON BOTTOM AND CYLINDER AND STAINLESS STEEL (1.4301) WELDED CLADDING 2mm
INDIVIDUAL TEMPERATURE CONTROLLER TYPE “CLIP” WITH INCLUDED MOTOR VALVE 1”, ELECTRICAL BOX AND CABLE PIPE UNDER INSULATION
PACKING – TRANSPORT FRAME TYPE “E” – WOODEN AND CARBON STEEL
CERTIFYING COST FOR CCT V total=12.7Hl ACCORDING TO PED 2014/68/EU, MODULE “B+F”
Направи запитване
[contact-form-7 id="6167" title="UK FORMA_copy"] -
Vinificator type BC2
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=2m3 D1=1000mm D2=1350mm Hcyl=1500mm a=83º
Upper manhole DN600
Two-way relief valve DN50 30 m3/h
Orifice for thermowell G1/2”
Sampling valve DN15
“Laser welded heat-exchange jacket F=2.1m2
Н=1250mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
Decanting elbow
Rectangular manhole vertically mounted 406х530mm
Dismountable false bottom
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport frame type “B” for forklift handling
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF3.5
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=3.5m3 D=1300mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=3m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type OT3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2R/2М
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=3m3 D=1330mm Hcyl=2250mm
Floating lid D=1295mm
Lifting arm for floating lid D=1295mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=4m2 Н=1000mm / Вход/Изход G1” / Pmax=5bar / Tmax=50°C
Laser welded heat-exchange jacket F=2.7m2 Н=750mm / Вход/Изход G1” / Pmax=5bar / Tmax=50°C
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile aggitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Rectangular tank type REC – S1
Material – АISI 304
Internal surface finish – 2R
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank Vgeom=1m3 1000х1000х1000
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Total outlet DN40 up to butterfly valve and tap
Construction for forklift transportation
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF6.4 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=6.4m3 D=1750mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Grip for ladder
Heat-exchanging channel jacket F=3m2
Inlet/Outlet G1” / Pwork=3bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM10
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=9.9m3 D=2024mm Hcyl=3000mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Dynamic sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type OT5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5m3 D=1600 Hcyl=2500mm
Floating lid D=1570mm
Lifting arm for floating lid D=1570mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type OT3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3m3 D=1320 Hcyl=2250mm
Floating lid D=1295mm
Lifting arm for floating lid D=1295mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=4.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 310х420 mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF10 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=10.3m3 D=2024mm Hcyl=3000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.2m3 D=1592mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF2.5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=2.5m3 D=1393mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM10 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=9.9m3 D=2024mm Hcyl=3000mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Rotational sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.1m3 D=1592mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Rotational sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1000mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.1m3 D=1592mm Hcyl=1500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Rotational sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=3.5m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=750mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 310х420mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]
