-
Tank type K20.8
With slight transport damage,
Material AISI 304
Internal surface finish: 2R
External surface finish: 2R+2M (marbled)
Internal welding seams – strip grinded 2×20 Ra<1.6μm
External welding seams – strip grinded 2×20 Ra<1.6μmTANK V=20.8m3 D=2200mm Hcyl=5250mm
– asymmetric conical lid
– cylindrical part H=5250mm;
– conical bottom 15° central cone;
– 4pcs. adjustable legs”
Socket for two-way relief valve RD78 FI58
Upper manhole DN500 art.50/1P ELICA
Profile for catwalk
Cleaning system with 1pc. static spray ball CB2-65.25 flow at 1 bar- 10m3/h for tank cleaning; 1pcs. static sprayball for upper manhole; and pipeline DN 50 up to welding union DIN11851
Overflow pipe line DN50 into the dome with welding male at the lower ,800mm measured from the floor
Clear outlet DN50 with welding male
Clear outlet DN50 with welding male DIN 11851 15° inclined and strengthened
Connection for temperature control with welding male and probe DIN DN20
Valve for sampling DN 20
Level indicator with acrylic pipe Н=5250 – connected to cylinder, the top is opened
Elliptical manhole art. A4 – 340/440 Laveggi – AISI 304L without arm / D tank > 1393mm / new
Laser-welded dimple jacket F=5.5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, 1.4307/2B upper jacket with connection to the top
Serial connection for heat exchange jackets 1”
Drain for heat exchange jacket till tap – 1/2”
Total Outlet DN50 with welding male
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Tank type K20.8
With slight transport damage,
Material AISI 304
Internal surface finish: 2R
External surface finish: 2R+2M (marbled)
Internal welding seams – strip grinded 2×20 Ra<1.6μm
External welding seams – strip grinded 2×20 Ra<1.6μmTANK V=20.8m3 D=2200mm Hcyl=5250mm
– asymmetric conical lid
– cylindrical part H=5250mm;
– conical bottom 15° central cone;
– 4pcs. adjustable legs”
Socket for two-way relief valve RD78 FI58
Upper manhole DN500 art.50/1P ELICA
Profile for catwalk
Cleaning system with 1pc. static spray ball CB2-65.25 flow at 1 bar- 10m3/h for tank cleaning; 1pcs. static sprayball for upper manhole; and pipeline DN 50 up to welding union DIN11851
Overflow pipe line DN50 into the dome with welding male at the lower ,800mm measured from the floor
Clear outlet DN50 with welding male
Clear outlet DN50 with welding male DIN 11851 15° inclined and strengthened
Connection for temperature control with welding male and probe DIN DN20
Valve for sampling DN 20
Level indicator with acrylic pipe Н=5250 – connected to cylinder, the top is opened
Elliptical manhole art. A4 – 340/440 Laveggi – AISI 304L without arm / D tank > 1393mm / new
Laser-welded dimple jacket F=5.5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, 1.4307/2B upper jacket with connection to the top
Serial connection for heat exchange jackets 1”
Drain for heat exchange jacket till tap – 1/2”
Total Outlet DN50 with welding male
Send an inquiry
SKU: 12110102 Category: ON STOCK -
Fermenter type WF10 2B/2M/D
With slight transport damage
Material – 1.4307 / АISI 304L
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20Vessel V=10.1m3 D=1874mm
– Asymmetric conycal top
– Cylindrical part Н=3500мм
– Conical bottom a15°
– Profile (pyramidal) leg on adjustable support – 4pcs.
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Spray ball ф40
CIP pipeline up to butterfly valve and tap
Level indicator with acryl pipe – connected with cylindrical part and CIP pipeline
Laser welded heat-exchange jacket F=6.2m2
H=1000mm /Inlet/Outlet G 3/4″ / Pmax=5bar / Tmax=50°C
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “А” – wooden saddles
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF10 2B/2M/D
With slight transport damage
Material – 1.4307 / АISI 304L
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20Vessel V=10.1m3 D=1874mm
– Asymmetric conycal top
– Cylindrical part Н=3500мм
– Conical bottom a15°
– Profile (pyramidal) leg on adjustable support – 4pcs.
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Spray ball ф40
CIP pipeline up to butterfly valve and tap
Level indicator with acryl pipe – connected with cylindrical part and CIP pipeline
Laser welded heat-exchange jacket F=6.2m2
H=1000mm /Inlet/Outlet G 3/4″ / Pmax=5bar / Tmax=50°C
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “А” – wooden saddles
Send an inquiry
SKU: 12115008 Category: ON STOCK -
Fermenter type WF6.4 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=6.4m3 D=1750mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Heat-exchanging channel jacket F=3m2
Inlet/Outlet G1” / Pwork=3bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF6.4 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=6.4m3 D=1750mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Heat-exchanging channel jacket F=3m2
Inlet/Outlet G1” / Pwork=3bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
SKU: 52005001 Category: ON STOCK -
Fermenter type WF1.1 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=1.1m3 D=950mm Hcyl=1500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=1.1m2
Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF1.1 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=1.1m3 D=950mm Hcyl=1500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=1.1m2
Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
SKU: 52005002 Category: ON STOCK -
Tank type К5.3 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Sampling valve DN15
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Tank type К5.3 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Sampling valve DN15
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
SKU: 12190050 Category: ON STOCK -
Fermenter type WF3.2 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=3.2m3 D=1393mm Hcyl=2000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF3.2 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=3.2m3 D=1393mm Hcyl=2000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
SKU: 12190051/12190063 Category: ON STOCK -
Fermenter type WF5.3 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=2m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=2m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF5.3 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=2m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=2m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
SKU: 12190052 Category: ON STOCK -
Fermenter type WF10 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=10.3m3 D=2024mm Hcyl=3000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=2.9m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=2.9m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF10 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=10.3m3 D=2024mm Hcyl=3000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=2.9m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=2.9m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
SKU: 12190053 Category: ON STOCK -
Vinificator type BM10
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=9.9m3 D=2024mm Hcyl=3000mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Dynamic sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Vinificator type BM10
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=9.9m3 D=2024mm Hcyl=3000mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Dynamic sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
SKU: 12290005 Category: ON STOCK -
Mobile tank for diesel fuel DTD5
Material – AISI304
Internal surface finish – 2B
External surface finish – 2MVessel V=5.3m3 D=1783mm Hcyl=2000
Manhole DN400 with flange and lid
Manhole DN600
Inlet for diesel fuel up to welding male and tap DN100
Orifice with tap G 2”
Orifice with tap G 1½”
Outlet for two-way relief valve G 2”
Stainless steel cladding on bottom and tank shell
Outlet for diesel fuel up to ball valve 1”
Ladder Н=1905mm
Orifice for eyepiece G 1”
Orifice for eyepiece G 1”
Profiles for lifting with a forklift L=1700мм
Total outlet up to ball valve 1”
Total outlet on the cladding up to ball valve and tap 1”
Two-way relief valve on the cladding
Option
– Level measuring system with digital display
– Stainless steel box for the level measuring system
Option – Stainless steel fuel management system
– Pump
– Mechanical aluminium counter
– 6m tube and automatic diesel fuel nozzle
– Water filter
– Non-return valve
– Washable steel filter
– Stainless steel box
Option – WEB based monitoring system
– WEB based
– Up to 1000 users
– Stainless steel box 300х300х150mm
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Mobile tank for diesel fuel DTD5
Material – AISI304
Internal surface finish – 2B
External surface finish – 2MVessel V=5.3m3 D=1783mm Hcyl=2000
Manhole DN400 with flange and lid
Manhole DN600
Inlet for diesel fuel up to welding male and tap DN100
Orifice with tap G 2”
Orifice with tap G 1½”
Outlet for two-way relief valve G 2”
Stainless steel cladding on bottom and tank shell
Outlet for diesel fuel up to ball valve 1”
Ladder Н=1905mm
Orifice for eyepiece G 1”
Orifice for eyepiece G 1”
Profiles for lifting with a forklift L=1700мм
Total outlet up to ball valve 1”
Total outlet on the cladding up to ball valve and tap 1”
Two-way relief valve on the cladding
Option
– Level measuring system with digital display
– Stainless steel box for the level measuring system
Option – Stainless steel fuel management system
– Pump
– Mechanical aluminium counter
– 6m tube and automatic diesel fuel nozzle
– Water filter
– Non-return valve
– Washable steel filter
– Stainless steel box
Option – WEB based monitoring system
– WEB based
– Up to 1000 users
– Stainless steel box 300х300х150mm
Send an inquiry
SKU: 516075 Category: ON STOCK -
Fermenter type OT5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5m3 D=1600 Hcyl=2500mm
Floating lid D=1570mm
Lifting arm for floating lid D=1570mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type OT5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5m3 D=1600 Hcyl=2500mm
Floating lid D=1570mm
Lifting arm for floating lid D=1570mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
SKU: 12190032 Category: ON STOCK -
Vinificator type OT3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3m3 D=1320 Hcyl=2250mm
Floating lid D=1295mm
Lifting arm for floating lid D=1295mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=4.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 310х420 mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Vinificator type OT3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3m3 D=1320 Hcyl=2250mm
Floating lid D=1295mm
Lifting arm for floating lid D=1295mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=4.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 310х420 mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
SKU: 12190031 Category: ON STOCK -
Fermenter type WF10 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=10.3m3 D=2024mm Hcyl=3000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF10 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=10.3m3 D=2024mm Hcyl=3000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
SKU: 12190039 Category: ON STOCK -
Fermenter type WF5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
SKU: 12190038 Category: ON STOCK -
Fermenter type WF3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.2m3 D=1592mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.2m3 D=1592mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
SKU: 12190037 Category: ON STOCK -
Fermenter type WF2.5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=2.5m3 D=1393mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF2.5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=2.5m3 D=1393mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
SKU: 12190036 Category: ON STOCK
