-
Vinificator type BC2
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=2m3 D1=1000mm D2=1350mm Hcyl=1500mm a=83º
Upper manhole DN600
Two-way relief valve DN50 30 m3/h
Orifice for thermowell G1/2”
Sampling valve DN15
“Laser welded heat-exchange jacket F=2.1m2
Н=1250mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
Decanting elbow
Rectangular manhole vertically mounted 406х530mm
Dismountable false bottom
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport frame type “B” for forklift handling
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Vinificator type BC2
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=2m3 D1=1000mm D2=1350mm Hcyl=1500mm a=83º
Upper manhole DN600
Two-way relief valve DN50 30 m3/h
Orifice for thermowell G1/2”
Sampling valve DN15
“Laser welded heat-exchange jacket F=2.1m2
Н=1250mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
Decanting elbow
Rectangular manhole vertically mounted 406х530mm
Dismountable false bottom
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport frame type “B” for forklift handling
Send an inquiry
-
Fermenter type WF3
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=3m3 D=1393mm Hcyl=2000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=3.1m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF3
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=3m3 D=1393mm Hcyl=2000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=3.1m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
-
Fermenter type WF1.5
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2B
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=1.5m3 D=1113mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=1.1m2
Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF1.5
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2B
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=1.5m3 D=1113mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=1.1m2
Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
-
Fermenter type WF5.3
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=4.8m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF5.3
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=4.8m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
-
Fermenter type WF5.1
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=5.1m3 D=1615mm Hcyl=2250mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=4.8m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF5.1
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=5.1m3 D=1615mm Hcyl=2250mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=4.8m2
Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
-
Tank type К5.2
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20
Tank V=5.2m3 D=1580mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with a tank shell and upper manhole
Grip for ladder
Sampling valve DN15
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Tank type К5.2
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20
Tank V=5.2m3 D=1580mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with a tank shell and upper manhole
Grip for ladder
Sampling valve DN15
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
-
Fermenter type WF10.2
Material – АISI 304
Internal surface finish – 2B
External surface finish – 2B/2J
Internal welding seams – Strip grinded2х20
External welding seams – Strip grinded2х20
Tank V=10.2m3 D=2194mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Grip for ladder
Level indicator with acrylic pipe – connected with tank shell and upper manhole
Laser-welded dimple jacket F=5m2 / H=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C
Laser-welded dimple jacket F=3.3m2 / H=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C
Orifice for thermowell G1/2”
Analog thermometer
Sampling valve DN15
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve DN50 and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF10.2
Material – АISI 304
Internal surface finish – 2B
External surface finish – 2B/2J
Internal welding seams – Strip grinded2х20
External welding seams – Strip grinded2х20
Tank V=10.2m3 D=2194mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Grip for ladder
Level indicator with acrylic pipe – connected with tank shell and upper manhole
Laser-welded dimple jacket F=5m2 / H=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C
Laser-welded dimple jacket F=3.3m2 / H=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C
Orifice for thermowell G1/2”
Analog thermometer
Sampling valve DN15
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve DN50 and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
-
Fermenter type WF5
Material – АISI 304
Internal surface finish – 2B
External surface finish – 2B/2J
Internal welding seams – Strip grinded2х20
External welding seams – Strip grinded2х20
WITH SLIGHT TRANSPORT DAMAGES
Tank V=5.2m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Inlet for inert gas up to ball valve G1/2”
Level indicator with acrylic pipe – connected with tank shell and upper manhole
Cooling chanel jacket F=3.3m2 / Inlet/Outlet G1” / Pmax=2.5bar
Orifice for thermowell G1/2”
Sampling valve DN15
Analog thermometer
Grip for entering
Elliptical manhole 310x445mm
Inlet with decanting elbow up to butterfly valve and tap DN50
Total outlet DN50 up to butterfly valve and tap
Control panel for automated temperature control – thermowell, thermocontroler, motorized ball valve included and PVC box 400х300х150
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF5
Material – АISI 304
Internal surface finish – 2B
External surface finish – 2B/2J
Internal welding seams – Strip grinded2х20
External welding seams – Strip grinded2х20
WITH SLIGHT TRANSPORT DAMAGES
Tank V=5.2m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Inlet for inert gas up to ball valve G1/2”
Level indicator with acrylic pipe – connected with tank shell and upper manhole
Cooling chanel jacket F=3.3m2 / Inlet/Outlet G1” / Pmax=2.5bar
Orifice for thermowell G1/2”
Sampling valve DN15
Analog thermometer
Grip for entering
Elliptical manhole 310x445mm
Inlet with decanting elbow up to butterfly valve and tap DN50
Total outlet DN50 up to butterfly valve and tap
Control panel for automated temperature control – thermowell, thermocontroler, motorized ball valve included and PVC box 400х300х150
Send an inquiry
-
Melting tank type CTM-2
Material – АISI 304
Internal surface finish – 2B
External surface finish – 2B
Internal welding seams – Grinded up to Ra≤0.8
External welding seams – Strip grinded2х20
Tank V=2m3 D=1273mm Hcyl=1500mm
Stainless steel air vent 30 m3/h – 2”
Spray ball ф40 up to welding union DN50
Rectangular manhole 410х530 mm
Melting steam grid
Inlet/outlet melting steam grid DN20 up to flange DN20 PN6
Heat-exchanging jacket on tank bottom F=0.85m2 – inlet/outlet up to welding male G1” Pmax=6bar
Analog thermometer
Orifice for thermowell G1/2” (thermowell is not included)
Total outlet up to ball valve DN50 and filter
Entire insullation with rock wool 80mm and welded stainless steel cladding
Transport frame type “k” – wooden supports, transport belts – lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Melting tank type CTM-2
Material – АISI 304
Internal surface finish – 2B
External surface finish – 2B
Internal welding seams – Grinded up to Ra≤0.8
External welding seams – Strip grinded2х20
Tank V=2m3 D=1273mm Hcyl=1500mm
Stainless steel air vent 30 m3/h – 2”
Spray ball ф40 up to welding union DN50
Rectangular manhole 410х530 mm
Melting steam grid
Inlet/outlet melting steam grid DN20 up to flange DN20 PN6
Heat-exchanging jacket on tank bottom F=0.85m2 – inlet/outlet up to welding male G1” Pmax=6bar
Analog thermometer
Orifice for thermowell G1/2” (thermowell is not included)
Total outlet up to ball valve DN50 and filter
Entire insullation with rock wool 80mm and welded stainless steel cladding
Transport frame type “k” – wooden supports, transport belts – lifting from above
Send an inquiry
-
Fermenter type OT3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2R/2М
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=3m3 D=1330mm Hcyl=2250mm
Floating lid D=1295mm
Lifting arm for floating lid D=1295mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=4m2 Н=1000mm / Вход/Изход G1” / Pmax=5bar / Tmax=50°C
Laser welded heat-exchange jacket F=2.7m2 Н=750mm / Вход/Изход G1” / Pmax=5bar / Tmax=50°C
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile aggitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type OT3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2R/2М
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=3m3 D=1330mm Hcyl=2250mm
Floating lid D=1295mm
Lifting arm for floating lid D=1295mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=4m2 Н=1000mm / Вход/Изход G1” / Pmax=5bar / Tmax=50°C
Laser welded heat-exchange jacket F=2.7m2 Н=750mm / Вход/Изход G1” / Pmax=5bar / Tmax=50°C
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile aggitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
-
Fermenter type WF10 2B/2M/D
With slight transport damage
Material – 1.4307 / АISI 304L
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20Vessel V=10.1m3 D=1874mm
– Asymmetric conycal top
– Cylindrical part Н=3500мм
– Conical bottom a15°
– Profile (pyramidal) leg on adjustable support – 4pcs.
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Spray ball ф40
CIP pipeline up to butterfly valve and tap
Level indicator with acryl pipe – connected with cylindrical part and CIP pipeline
Laser welded heat-exchange jacket F=6.2m2
H=1000mm /Inlet/Outlet G 3/4″ / Pmax=5bar / Tmax=50°C
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “А” – wooden saddles
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF10 2B/2M/D
With slight transport damage
Material – 1.4307 / АISI 304L
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20Vessel V=10.1m3 D=1874mm
– Asymmetric conycal top
– Cylindrical part Н=3500мм
– Conical bottom a15°
– Profile (pyramidal) leg on adjustable support – 4pcs.
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Spray ball ф40
CIP pipeline up to butterfly valve and tap
Level indicator with acryl pipe – connected with cylindrical part and CIP pipeline
Laser welded heat-exchange jacket F=6.2m2
H=1000mm /Inlet/Outlet G 3/4″ / Pmax=5bar / Tmax=50°C
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “А” – wooden saddles
Send an inquiry
-
Fermenter type WF6.4 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=6.4m3 D=1750mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Grip for ladder
Heat-exchanging channel jacket F=3m2
Inlet/Outlet G1” / Pwork=3bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF6.4 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=6.4m3 D=1750mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Grip for ladder
Heat-exchanging channel jacket F=3m2
Inlet/Outlet G1” / Pwork=3bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
-
Fermenter type WF1.1 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=1.1m3 D=950mm Hcyl=1500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=1.1m2
Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF1.1 2B/2M
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Vessel V=1.1m3 D=950mm Hcyl=1500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=1.1m2
Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Send an inquiry
-
Fermenter type WF3.2 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=3.2m3 D=1393mm Hcyl=2000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Fermenter type WF3.2 2М/2J
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2М/2J
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded 2х20Vessel V=3.2m3 D=1393mm Hcyl=2000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
“Laser welded heat-exchange jacket F=1.4m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Grip for ladder
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
-
Vinificator type BM10
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=9.9m3 D=2024mm Hcyl=3000mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Dynamic sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Vinificator type BM10
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=9.9m3 D=2024mm Hcyl=3000mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Dynamic sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
-
Mobile tank for diesel fuel DTD5
Material – AISI304
Internal surface finish – 2B
External surface finish – 2MVessel V=5.3m3 D=1783mm Hcyl=2000
Manhole DN400 with flange and lid
Manhole DN600
Inlet for diesel fuel up to welding male and tap DN100
Orifice with tap G 2”
Orifice with tap G 1½”
Outlet for two-way relief valve G 2”
Stainless steel cladding on bottom and tank shell
Outlet for diesel fuel up to ball valve 1”
Ladder Н=1905mm
Orifice for eyepiece G 1”
Orifice for eyepiece G 1”
Profiles for lifting with a forklift L=1700мм
Total outlet up to ball valve 1”
Total outlet on the cladding up to ball valve and tap 1”
Two-way relief valve on the cladding
Option
– Level measuring system with digital display
– Stainless steel box for the level measuring system
Option – Stainless steel fuel management system
– Pump
– Mechanical aluminium counter
– 6m tube and automatic diesel fuel nozzle
– Water filter
– Non-return valve
– Washable steel filter
– Stainless steel box
Option – WEB based monitoring system
– WEB based
– Up to 1000 users
– Stainless steel box 300х300х150mm
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]Mobile tank for diesel fuel DTD5
Material – AISI304
Internal surface finish – 2B
External surface finish – 2MVessel V=5.3m3 D=1783mm Hcyl=2000
Manhole DN400 with flange and lid
Manhole DN600
Inlet for diesel fuel up to welding male and tap DN100
Orifice with tap G 2”
Orifice with tap G 1½”
Outlet for two-way relief valve G 2”
Stainless steel cladding on bottom and tank shell
Outlet for diesel fuel up to ball valve 1”
Ladder Н=1905mm
Orifice for eyepiece G 1”
Orifice for eyepiece G 1”
Profiles for lifting with a forklift L=1700мм
Total outlet up to ball valve 1”
Total outlet on the cladding up to ball valve and tap 1”
Two-way relief valve on the cladding
Option
– Level measuring system with digital display
– Stainless steel box for the level measuring system
Option – Stainless steel fuel management system
– Pump
– Mechanical aluminium counter
– 6m tube and automatic diesel fuel nozzle
– Water filter
– Non-return valve
– Washable steel filter
– Stainless steel box
Option – WEB based monitoring system
– WEB based
– Up to 1000 users
– Stainless steel box 300х300х150mm
Send an inquiry
