-
CCT Tank – 12,7 Hl
CCT Vtotal=12.7Hl Vwork=10Hl Dinternal=1150mm Dinsulation=1300mm Hmax=2570mm;
– working pressure 3bar;
– design pressure 3.3bar;
– test pressure 4.7bar;
– design vacuum 400mm WC
– Working temperature in the tank: up to 30˚C
– CIP cleaning in the tank: up to 30˚C
– Material 1.4307 (AISI 304L)
– Internal surface finish: 2B;
– External surface finish: 2J;
– Internal butt welding seams: flat grinded to Ra<0.8µm;
– Internal corner welding seams: strip grinded 2×20 to Ra<0.8µm;
– External butt welding seams: strip grinded 2×20 to Ra<1.6µm;
– External corner welding seams: strip grinded 2×20 to Ra<1.6µm;
– Tank surfaces: completely cleaned and degreased;TANK 1.27/1150/750
– torispherical lid D=1150mm DIN28011
– cylindrical part D=1150mm Hcyl=750mm
– conical bottom D=1150mm 60°
– 3pcs. adjustable brushed legs
TANK TOP SYSTEM:
– Safety valve art.6147 DN20 pressure range P=2.5-8bar;
-Vacuum valve art.6139 DN50;
-Spray ball LECHLER ”Mini Spinner” 360°,DN20 slip-on;
-CIP/CO2 valve DN50; – CIP connection DN50;
– Tank connection DN65/DN50;
*needed CIP at 3bar-15m3/h;
CIP/CO2 PIPE LINE DN40 ENDING WITH BUTTERFLY VALVE DN40 WITH CLAMP CONNECTION
(distance from floor to pipeline H=1000mm)
BUNGING VALVE DN 25 FOR PRESSURE P= 0.3 – 3bar ”KIESELMANN”
MANOMETER D100 G1/2”
GRIP FOR LADDER
COOLING LASER-WELDED DIMPLE JACKET ON TANK SHELL F=1.2m2 H=475mm, Pmax=5bar Tmax=50°C,
WITH INLET/OUTLET G1”
COOLING LASER-WELDED DIMPLE JACKET ON TANK BOTTOM F=0.9m2, Pmax=5bar Tmax=50°C WITH INLET/OUTLET G1”
OUTSIDE COLLECTOR PIPE DN32 FOR CONNECTION TANK BOTTOM AND TANK SIDE JACKETS
CONNECTION G 1/2” TEMPERATURE CONTROLLER TYPE “CLIP”
ELLIPTICAL MANHOLE 340х440 LAVEGGI Аrt. А18 / PED
MANUAL SAMPLE VALVE DN10 KIESELMANN
DOUBLE OUTLET (CLEAR AND TOTAL) DN32 EACH OF THEM ENDING WITH BUTTERFLY VALVE WITH CLAMP CONNECTION
(distance from floor to outlet H=250mm)
INSULATION 75mm PU foam CFC – free ON BOTTOM AND CYLINDER AND STAINLESS STEEL (1.4301) WELDED CLADDING 2mm
INDIVIDUAL TEMPERATURE CONTROLLER TYPE “CLIP” WITH INCLUDED MOTOR VALVE 1”, ELECTRICAL BOX AND CABLE PIPE UNDER INSULATION
PACKING – TRANSPORT FRAME TYPE “E” – WOODEN AND CARBON STEEL
CERTIFYING COST FOR CCT V total=12.7Hl ACCORDING TO PED 2014/68/EU, MODULE “B+F”
Направи запитване
[contact-form-7 id="6167" title="UK FORMA_copy"] -
Fermenter type WF3.5
Material – АISI 304
Internal surface finish – 2B
External surface finish- 2M
Internal welding seams – Strip grinded 2х20
External welding seams – Strip grinded2х20
Tank V=3.5m3 D=1300mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
“Laser welded heat-exchange jacket F=3m2
Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport frame type “A” – Wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM3
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.1m3 D=1592mm Hcyl=1500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Dynamic sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 310х420 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM5
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.1m3 D=1592mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Dynamic sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1000mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF2
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=2m3 D=1273mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=2m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “K” – wooden supports and transport belts, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF3
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.2m3 D=1592mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=2.5m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “K” – wooden supports and transport belts, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF5
Material – АISI 304
Internal surface finish – 2В
External surface finish – 2М
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=3.6m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.1m3 D=1592mm Hcyl=1500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Rotational sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=3.5m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=750mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 310х420mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.1m3 D=1592mm Hcyl=2500mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Rotational sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1000mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530 mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type BM10 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=9.9m3 D=2024mm Hcyl=3000mm
Upper manhole DN400
Two-way relief valve DN50 30 m3/h
Rotational sprinkling device DN50
Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
Grip for ladder
Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid L=1500mm
Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 406х530mm
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF2.5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=2.5m3 D=1393mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3.2m3 D=1592mm Hcyl=1500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5.3m3 D=1592mm Hcyl=2500mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type WF10 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=10.3m3 D=2024mm Hcyl=3000mm
Upper manhole DN300
Two-way relief valve DN50 30 m3/h
Level indicator with acryl pipe – connected with tank shell and upper manhole
Grip for ladder
Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Grip for entering
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Vinificator type OT3 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=3m3 D=1320 Hcyl=2250mm
Floating lid D=1295mm
Lifting arm for floating lid D=1295mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=4.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Strain-off grid
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Rectangular manhole vertically mounted 310х420 mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
Total outlet DN50 up to ball valve Veneta Acciai and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"] -
Fermenter type OT5 2R
Material – АISI 304
Internal surface finish – 2R
External surface finish – 2М/2B
Internal welding seams – Strip grinded 2×20
External welding seams – Strip grinded 2×20Vessel V=5m3 D=1600 Hcyl=2500mm
Floating lid D=1570mm
Lifting arm for floating lid D=1570mm
Level indicator with acryl pipe – open type
Grip for ladder
Laser welded heat-exchange jacket F=5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
Sampling valve DN15
Analog thermometer G1/2″
Orifice for thermowell G1/2”
Elliptical manhole 310x445mm
Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
Inlet/Outlet DN50 up to butterfly valve and tap
Total outlet DN50 up to butterfly valve and tap
Transport packing type “A” – wooden saddles, lifting from above
Send an inquiry
[contact-form-7 id="4440" title="UK FORMA"]
