CCT Tank – 12,7 Hl

CCT Vtotal=12.7Hl Vwork=10Hl Dinternal=1150mm Dinsulation=1300mm Hmax=2570mm;
– working pressure 3bar;
– design pressure 3.3bar;
– test pressure 4.7bar;
– design vacuum 400mm WC
– Working temperature in the tank: up to 30˚C
– CIP cleaning in the tank: up to 30˚C
– Material 1.4307 (AISI 304L)
– Internal surface finish: 2B;
– External surface finish: 2J;
– Internal butt welding seams: flat grinded to Ra<0.8µm;
– Internal corner welding seams: strip grinded 2×20 to Ra<0.8µm;
– External butt welding seams: strip grinded 2×20 to Ra<1.6µm;
– External corner welding seams: strip grinded 2×20 to Ra<1.6µm;
– Tank surfaces: completely cleaned and degreased;

TANK 1.27/1150/750
– torispherical lid D=1150mm DIN28011
– cylindrical part D=1150mm Hcyl=750mm
– conical bottom D=1150mm 60°
– 3pcs. adjustable brushed legs
TANK TOP SYSTEM:
– Safety valve art.6147 DN20 pressure range P=2.5-8bar;
-Vacuum valve art.6139 DN50;
-Spray ball LECHLER ”Mini Spinner” 360°,DN20 slip-on;
-CIP/CO2 valve DN50; – CIP connection DN50;
– Tank connection DN65/DN50;
*needed CIP at 3bar-15m3/h;
CIP/CO2 PIPE LINE DN40 ENDING WITH BUTTERFLY VALVE DN40 WITH CLAMP CONNECTION
(distance from floor to pipeline H=1000mm)
BUNGING VALVE DN 25 FOR PRESSURE P= 0.3 – 3bar ”KIESELMANN”
MANOMETER D100 G1/2”
GRIP FOR LADDER
COOLING LASER-WELDED DIMPLE JACKET ON TANK SHELL F=1.2m2 H=475mm, Pmax=5bar Tmax=50°C,
WITH INLET/OUTLET G1”
COOLING LASER-WELDED DIMPLE JACKET ON TANK BOTTOM F=0.9m2, Pmax=5bar Tmax=50°C WITH INLET/OUTLET G1”
OUTSIDE COLLECTOR PIPE DN32 FOR CONNECTION TANK BOTTOM AND TANK SIDE JACKETS
CONNECTION G 1/2” TEMPERATURE CONTROLLER TYPE “CLIP”
ELLIPTICAL MANHOLE 340х440 LAVEGGI Аrt. А18 / PED
MANUAL SAMPLE VALVE DN10 KIESELMANN
DOUBLE OUTLET (CLEAR AND TOTAL) DN32 EACH OF THEM ENDING WITH BUTTERFLY VALVE WITH CLAMP CONNECTION
(distance from floor to outlet H=250mm)
INSULATION 75mm PU foam CFC – free ON BOTTOM AND CYLINDER AND STAINLESS STEEL (1.4301) WELDED CLADDING 2mm
INDIVIDUAL TEMPERATURE CONTROLLER TYPE “CLIP” WITH INCLUDED MOTOR VALVE 1”, ELECTRICAL BOX AND CABLE PIPE UNDER INSULATION
PACKING – TRANSPORT FRAME TYPE “E” – WOODEN AND CARBON STEEL
CERTIFYING COST FOR CCT V total=12.7Hl ACCORDING TO PED 2014/68/EU, MODULE “B+F”

Направи запитване