fbpx
  • Vinificator type BM3

    Code – W033 I 5pcs on 18.12.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.1m3 D=1592mm Hcyl=1500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 310х420 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type BM3

    Code – W033 I 5pcs on 18.12.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.1m3 D=1592mm Hcyl=1500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 310х420 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Vinificator type BM5

    Code – W034 I 10 pcs on 30.10.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.1m3 D=1592mm Hcyl=2500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1000mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type BM5

    Code – W034 I 10 pcs on 30.10.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.1m3 D=1592mm Hcyl=2500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1000mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Vinificator type BM10

    Code – W035 I 10 pcs on 04.11.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=9.9m3 D=2024mm Hcyl=3000mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type BM10

    Code – W035 I 10 pcs on 04.11.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=9.9m3 D=2024mm Hcyl=3000mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Fermenter type WF2

    Code – W036 I On stock – 5 pcs 

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=2m3 D=1273mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “K” – wooden supports and transport belts, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF2

    Code – W036 I On stock – 5 pcs 

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=2m3 D=1273mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “K” – wooden supports and transport belts, lifting from above


    Send an inquiry




    Category:
  • Fermenter type WF3

    Code – W037 I 5 pcs on 04.01.2021

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.2m3 D=1592mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2.5m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “K” – wooden supports and transport belts, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF3

    Code – W037 I 5 pcs on 04.01.2021

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.2m3 D=1592mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2.5m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “K” – wooden supports and transport belts, lifting from above


    Send an inquiry




    Category:
  • Fermenter type WF10

    Code – W039 I 5 pcs on 11.11.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=10.3m3 D=2024mm Hcyl=3000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=6.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF10

    Code – W039 I 5 pcs on 11.11.2020

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=10.3m3 D=2024mm Hcyl=3000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=6.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Vinificator type BM3 2R

    Code – W040 I 5 pcs on 23.12.2020

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.1m3 D=1592mm Hcyl=1500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Rotational sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=3.5m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=750mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 310х420mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type BM3 2R

    Code – W040 I 5 pcs on 23.12.2020

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.1m3 D=1592mm Hcyl=1500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Rotational sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=3.5m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=750mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 310х420mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Vinificator type BM5 2R

    Code – W041 I 5 pcs on 08.01.2021

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.1m3 D=1592mm Hcyl=2500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Rotational sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1000mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type BM5 2R

    Code – W041 I 5 pcs on 08.01.2021

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.1m3 D=1592mm Hcyl=2500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Rotational sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1000mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Vinificator type BM10 2R

    Code – W042 I 5 pcs on 14.12.2020

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=9.9m3 D=2024mm Hcyl=3000mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Rotational sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type BM10 2R

    Code – W042 I 5 pcs on 14.12.2020

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=9.9m3 D=2024mm Hcyl=3000mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Rotational sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Fermenter type WF2.5 2R

    Code – W043 I 10 pcs on 29.10.2020

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=2.5m3 D=1393mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF2.5 2R

    Code – W043 I 10 pcs on 29.10.2020

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=2.5m3 D=1393mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Fermenter type WF3 2R

    Code – W044 I 10 pcs on 29.01.2021

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.2m3 D=1592mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF3 2R

    Code – W044 I 10 pcs on 29.01.2021

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.2m3 D=1592mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:
  • Fermenter type WF5 2R

    Code – W045 I 15 pcs on 22.01.2021

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF5 2R

    Code – W045 I 15 pcs on 22.01.2021

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    Category:

Start typing and press Enter to search

Shopping Cart

No products in the basket.