fbpx
  • Tank type K20.8

    With slight transport damage,

    Material AISI 304
    Internal surface finish: 2R
    External surface finish: 2R+2M (marbled)
    Internal welding seams – strip grinded 2×20 Ra<1.6μm
    External welding seams – strip grinded 2×20 Ra<1.6μm

    TANK V=20.8m3 D=2200mm Hcyl=5250mm
    – asymmetric conical lid
    – cylindrical part H=5250mm;
    – conical bottom 15° central cone;
    – 4pcs. adjustable legs”
    Socket for two-way relief valve RD78 FI58
    Upper manhole DN500 art.50/1P ELICA
    Profile for catwalk
    Cleaning system with 1pc. static spray ball CB2-65.25 flow at 1 bar- 10m3/h for tank cleaning; 1pcs. static sprayball for upper manhole; and pipeline DN 50 up to welding union DIN11851
    Overflow pipe line DN50 into the dome with welding male at the lower ,800mm measured from the floor
    Clear outlet DN50 with welding male
    Clear outlet DN50 with welding male DIN 11851 15° inclined and strengthened
    Connection for temperature control with welding male and probe DIN DN20
    Valve for sampling DN 20
    Level indicator with acrylic pipe Н=5250 – connected to cylinder, the top is opened
    Elliptical manhole art. A4 – 340/440 Laveggi – AISI 304L without arm / D tank > 1393mm / new
    Laser-welded dimple jacket F=5.5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, 1.4307/2B upper jacket with connection to the top
    Serial connection for heat exchange jackets 1”
    Drain for heat exchange jacket till tap – 1/2”
    Total Outlet DN50 with welding male


     

    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

     

    Tank type K20.8

    With slight transport damage,

    Material AISI 304
    Internal surface finish: 2R
    External surface finish: 2R+2M (marbled)
    Internal welding seams – strip grinded 2×20 Ra<1.6μm
    External welding seams – strip grinded 2×20 Ra<1.6μm

    TANK V=20.8m3 D=2200mm Hcyl=5250mm
    – asymmetric conical lid
    – cylindrical part H=5250mm;
    – conical bottom 15° central cone;
    – 4pcs. adjustable legs”
    Socket for two-way relief valve RD78 FI58
    Upper manhole DN500 art.50/1P ELICA
    Profile for catwalk
    Cleaning system with 1pc. static spray ball CB2-65.25 flow at 1 bar- 10m3/h for tank cleaning; 1pcs. static sprayball for upper manhole; and pipeline DN 50 up to welding union DIN11851
    Overflow pipe line DN50 into the dome with welding male at the lower ,800mm measured from the floor
    Clear outlet DN50 with welding male
    Clear outlet DN50 with welding male DIN 11851 15° inclined and strengthened
    Connection for temperature control with welding male and probe DIN DN20
    Valve for sampling DN 20
    Level indicator with acrylic pipe Н=5250 – connected to cylinder, the top is opened
    Elliptical manhole art. A4 – 340/440 Laveggi – AISI 304L without arm / D tank > 1393mm / new
    Laser-welded dimple jacket F=5.5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, 1.4307/2B upper jacket with connection to the top
    Serial connection for heat exchange jackets 1”
    Drain for heat exchange jacket till tap – 1/2”
    Total Outlet DN50 with welding male


     

    Send an inquiry




     

    SKU: 12110102 Category:
  • Fermenter type WF10 2B/2M/D

    With slight transport damage

    Material – 1.4307 / АISI 304L
    Internal surface finish – 2B
    External surface finish- 2M
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded2х20

    Vessel V=10.1m3 D=1874mm
    – Asymmetric conycal top
    – Cylindrical part Н=3500мм
    – Conical bottom a15°
    – Profile (pyramidal) leg on adjustable support – 4pcs.
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Spray ball ф40
    CIP pipeline up to butterfly valve and tap
    Level indicator with acryl pipe – connected with cylindrical part and CIP pipeline
    Laser welded heat-exchange jacket  F=6.2m2
    H=1000mm /Inlet/Outlet G  3/4″ / Pmax=5bar / Tmax=50°C
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type  “А” –  wooden saddles

     


    Send an inquiry

    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF10 2B/2M/D

    With slight transport damage

    Material – 1.4307 / АISI 304L
    Internal surface finish – 2B
    External surface finish- 2M
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded2х20

    Vessel V=10.1m3 D=1874mm
    – Asymmetric conycal top
    – Cylindrical part Н=3500мм
    – Conical bottom a15°
    – Profile (pyramidal) leg on adjustable support – 4pcs.
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Spray ball ф40
    CIP pipeline up to butterfly valve and tap
    Level indicator with acryl pipe – connected with cylindrical part and CIP pipeline
    Laser welded heat-exchange jacket  F=6.2m2
    H=1000mm /Inlet/Outlet G  3/4″ / Pmax=5bar / Tmax=50°C
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type  “А” –  wooden saddles

     


    Send an inquiry




    SKU: 12115008 Category:
  • Fermenter type WF6.4 2B/2M

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2M
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded2х20

    Tank V=6.4m3 D=1750mm Hcyl=2500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Heat-exchanging channel jacket F=3m2
    Inlet/Outlet G1” / Pwork=3bar / Tmax=50°C”
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap

     


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

     

    Fermenter type WF6.4 2B/2M

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2M
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded2х20

    Tank V=6.4m3 D=1750mm Hcyl=2500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Heat-exchanging channel jacket F=3m2
    Inlet/Outlet G1” / Pwork=3bar / Tmax=50°C”
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap

     


    Send an inquiry




     

    SKU: 52005001 Category:
  • Fermenter type WF1.1 2B/2M

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2M
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded2х20

    Vessel V=1.1m3 D=950mm Hcyl=1500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    “Laser welded heat-exchange jacket F=1.1m2
    Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap

     


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

     

    Fermenter type WF1.1 2B/2M

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2M
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded2х20

    Vessel V=1.1m3 D=950mm Hcyl=1500mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    “Laser welded heat-exchange jacket F=1.1m2
    Н=500mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap

     


    Send an inquiry




     

    SKU: 52005002 Category:
  • Tank type К5.3 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Sampling valve DN15
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

     

    Tank type К5.3 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Sampling valve DN15
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above


    Send an inquiry




     

    SKU: 12190050 Category:
  • Fermenter type WF3.2 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=3.2m3 D=1393mm Hcyl=2000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    “Laser welded heat-exchange jacket F=1.4m2
    Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    “Laser welded heat-exchange jacket F=1.4m2
    Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Grip for ladder
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above

     


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

     

    Fermenter type WF3.2 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=3.2m3 D=1393mm Hcyl=2000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    “Laser welded heat-exchange jacket F=1.4m2
    Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    “Laser welded heat-exchange jacket F=1.4m2
    Н=750mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Grip for ladder
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above

     


    Send an inquiry




     

    SKU: 12190051/12190063 Category:
  • Fermenter type WF5.3 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    “Laser welded heat-exchange jacket F=2m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    “Laser welded heat-exchange jacket F=2m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Grip for ladder
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above

     


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

     

    Fermenter type WF5.3 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    “Laser welded heat-exchange jacket F=2m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    “Laser welded heat-exchange jacket F=2m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Grip for ladder
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above

     


    Send an inquiry




     

    SKU: 12190052 Category:
  • Fermenter type WF10 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=10.3m3 D=2024mm Hcyl=3000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    “Laser welded heat-exchange jacket F=2.9m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    “Laser welded heat-exchange jacket F=2.9m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Grip for ladder
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

     

    Fermenter type WF10 2М/2J

    Material – АISI 304
    Internal surface finish – 2B
    External surface finish- 2М/2J
    Internal welding seams – Strip grinded 2х20
    External welding seams – Strip grinded 2х20

    Vessel V=10.3m3 D=2024mm Hcyl=3000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    “Laser welded heat-exchange jacket F=2.9m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    “Laser welded heat-exchange jacket F=2.9m2
    Н=1000mm / Inlet/Outlet G1” / Pmax=5bar / Tmax=50°C”
    Grip for ladder
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport frame type “A” – Wooden saddles, lifting from above


    Send an inquiry




     

    SKU: 12190053 Category:
  • Vinificator type BM10

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=9.9m3 D=2024mm Hcyl=3000mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type BM10

    Material – АISI 304
    Internal surface finish – 2В
    External surface finish – 2М
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=9.9m3 D=2024mm Hcyl=3000mm
    Upper manhole DN400
    Two-way relief valve DN50 30 m3/h
    Dynamic sprinkling device DN50
    Recirculation pipeline DN50 up to ball valve Veneta Acciai and tap
    Grip for ladder
    Laser welded heat-exchange jacket F=6.3m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid L=1500mm
    Outlet from strain-off grid DN50 up to ball valve Veneta Acciai and tap
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 406х530 mm
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    SKU: 12290005 Category:
  • Mobile tank for diesel fuel DTD5

    Material – AISI304
    Internal surface finish – 2B
    External surface finish – 2M

    Vessel V=5.3m3 D=1783mm Hcyl=2000
    Manhole DN400 with flange and lid
    Manhole DN600
    Inlet for diesel fuel up to welding male and tap DN100
    Orifice with tap G 2”
    Orifice with tap G 1½”
    Outlet for two-way relief valve G 2”
    Stainless steel cladding on bottom and tank shell
    Outlet for diesel fuel up to ball valve 1”
    Ladder Н=1905mm
    Orifice for eyepiece G 1”
    Orifice for eyepiece G 1”
    Profiles for lifting with a forklift L=1700мм
    Total outlet up to ball valve 1”
    Total outlet on the cladding up to ball valve and tap 1”
    Two-way relief valve on the cladding
    Option
    – Level measuring system with digital display
    – Stainless steel box for the level measuring system
    Option – Stainless steel fuel management system
    – Pump
    – Mechanical aluminium counter
    – 6m tube and automatic diesel fuel nozzle
    – Water filter
    – Non-return valve
    – Washable steel filter
    – Stainless steel box
    Option – WEB based monitoring system
    – WEB based
    – Up to 1000 users
    – Stainless steel box 300х300х150mm


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Mobile tank for diesel fuel DTD5

    Material – AISI304
    Internal surface finish – 2B
    External surface finish – 2M

    Vessel V=5.3m3 D=1783mm Hcyl=2000
    Manhole DN400 with flange and lid
    Manhole DN600
    Inlet for diesel fuel up to welding male and tap DN100
    Orifice with tap G 2”
    Orifice with tap G 1½”
    Outlet for two-way relief valve G 2”
    Stainless steel cladding on bottom and tank shell
    Outlet for diesel fuel up to ball valve 1”
    Ladder Н=1905mm
    Orifice for eyepiece G 1”
    Orifice for eyepiece G 1”
    Profiles for lifting with a forklift L=1700мм
    Total outlet up to ball valve 1”
    Total outlet on the cladding up to ball valve and tap 1”
    Two-way relief valve on the cladding
    Option
    – Level measuring system with digital display
    – Stainless steel box for the level measuring system
    Option – Stainless steel fuel management system
    – Pump
    – Mechanical aluminium counter
    – 6m tube and automatic diesel fuel nozzle
    – Water filter
    – Non-return valve
    – Washable steel filter
    – Stainless steel box
    Option – WEB based monitoring system
    – WEB based
    – Up to 1000 users
    – Stainless steel box 300х300х150mm


    Send an inquiry




    SKU: 516075 Category:
  • Fermenter type OT5 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5m3 D=1600 Hcyl=2500mm
    Floating lid D=1570mm
    Lifting arm for floating lid D=1570mm
    Level indicator with acryl pipe – open type
    Grip for ladder
    Laser welded heat-exchange jacket F=5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type OT5 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5m3 D=1600 Hcyl=2500mm
    Floating lid D=1570mm
    Lifting arm for floating lid D=1570mm
    Level indicator with acryl pipe – open type
    Grip for ladder
    Laser welded heat-exchange jacket F=5m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    SKU: 12190032 Category:
  • Vinificator type OT3 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3m3 D=1320 Hcyl=2250mm
    Floating lid D=1295mm
    Lifting arm for floating lid D=1295mm
    Level indicator with acryl pipe – open type
    Grip for ladder
    Laser welded heat-exchange jacket F=4.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 310х420 mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Vinificator type OT3 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3m3 D=1320 Hcyl=2250mm
    Floating lid D=1295mm
    Lifting arm for floating lid D=1295mm
    Level indicator with acryl pipe – open type
    Grip for ladder
    Laser welded heat-exchange jacket F=4.1m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Strain-off grid
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Rectangular manhole vertically mounted 310х420 mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to ball valve Veneta Acciai and tap
    Total outlet DN50 up to ball valve Veneta Acciai and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    SKU: 12190031 Category:
  • Fermenter type WF10 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=10.3m3 D=2024mm Hcyl=3000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF10 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=10.3m3 D=2024mm Hcyl=3000mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=7.9m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=7.6m2 Н=1250mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    SKU: 12190039 Category:
  • Fermenter type WF5 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF5 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=5.3m3 D=1592mm Hcyl=2500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=4.9m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=4.6m2 Н=1000mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    SKU: 12190038 Category:
  • Fermenter type WF3 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.2m3 D=1592mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF3 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=3.2m3 D=1592mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=3.4m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.4m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    SKU: 12190037 Category:
  • Fermenter type WF2.5 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=2.5m3 D=1393mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry
    [contact-form-7 id="4440" title="UK FORMA"]

    Fermenter type WF2.5 2R

    Material – АISI 304
    Internal surface finish – 2R
    External surface finish – 2М/2B
    Internal welding seams – Strip grinded 2×20
    External welding seams – Strip grinded 2×20

    Vessel V=2.5m3 D=1393mm Hcyl=1500mm
    Upper manhole DN300
    Two-way relief valve DN50 30 m3/h
    Level indicator with acryl pipe – connected with tank shell and upper manhole
    Grip for ladder
    Laser welded heat-exchange jacket F=2.9m2 Н=750mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Laser welded heat-exchange jacket F=2.1m2 Н=500mm, Inlet/Outlet G1”, Pmax=5bar, Tmax=50°C, 2B
    Sampling valve DN15
    Analog thermometer G1/2″
    Orifice for thermowell G1/2”
    Grip for entering
    Elliptical manhole 310x445mm
    Inlet for mobile agitator DN50 up to ball valve Veneta Acciai and tap
    Inlet/Outlet DN50 up to butterfly valve and tap
    Total outlet DN50 up to butterfly valve and tap
    Transport packing type “A” – wooden saddles, lifting from above


    Send an inquiry




    SKU: 12190036 Category:

Start typing and press Enter to search

Shopping Cart

No products in the basket.